Febri Ayu Susanti
11.240.0229
4P45
|
IP Address
|
Default Gateway
|
Serial 0/2
|
Serial 0/3
|
||
|
PC1
|
172.16.3.3/24
|
172.16.3.2
|
|||
|
PC2
|
172.16.1.2/24
|
172.16.1.1
|
|||
|
PC3
|
192.168.2.2/24
|
192.168.2.1
|
|||
|
R1
|
172.16.3.1/24
|
172.16.2.1/24
|
|||
|
R2
|
192.168.1.1/24
|
172.16.2.2/24
|
192.168.1.1/24
|
||
|
R3
|
192.168.2.1/24
|
192.168.1.2/24
|
|||
1.
Konfigurasi router 1
Router>ena
Router#config t
Enter configuration commands, one per
line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#int fa0/0
R1(config-if)#ip add 172.16.3.1
255.255.255.0
R1(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0,
changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on
Interface FastEthernet0/0, changed state to up
R1(config-if)#exit
R1(config)#int ser2/0
R1(config-if)#ip add 172.16.2.3
255.255.255.0
R1(config-if)#clock
R1(config-if)#clock r
R1(config-if)#clock rate 64000
R1(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0,
changed state to down
R1(config-if)#exit
R1(config)#end
R1#write
Building configuration...
[OK]
2.
Konfigurasi router 2
Router>ena
Router#config t
Enter configuration commands, one per
line. End with CNTL/Z.
Router(config)#hostname R2
R2(config)#int fa0/0
R2(config-if)#ip add 172.16.1.1
255.255.255.0
R2(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0,
changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on
Interface FastEthernet0/0, changed state to up
R2(config-if)#exit
R2(config)#int ser2/0
R2(config-if)#ip add 192.168.1.1
255.255.255.0
R2(config-if)#clock rate 64000
R2(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0,
changed state to up
R2(config-if)#exit
R2(config)#int ser3/0
%LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial2/0, changed state to up
R2(config-if)#ip add 172.16.2.1
255.255.255.0
R2(config-if)#no shut
%LINK-5-CHANGED: Interface Serial3/0,
changed state to down
R2(config-if)#exit
R2(config)#end
%SYS-5-CONFIG_I: Configured from console by
console
R2#write
Building configuration...
[OK]
3.
Konfigurasi router 3
Router>ena
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R3
R3(config)#int fa0/0
R3(config-if)#ip add 192.168.2.1
255.255.255.0
R3(config-if)#no shut
R3(config-if)#exit
R3(config)#int ser3/0
R3(config-if)#ip add 192.168.1.4
255.255.255.0
R3(config-if)#no shut
%LINK-5-CHANGED: Interface Serial3/0,
changed state to up
R3(config-if)#exit
R3(config)#
R3#
%SYS-5-CONFIG_I: Configured from console by
console
R3#write
Building configuration...
[OK]
a.
Ip address PC1
b.
Ip address PC2
c.
Ip address PC3
0 komentar:
Posting Komentar